- Two stage electrical solution for dual or triple pump return fuel systems for efficient load handling and power distribution
- Simple trigger system works with basic switched 12V+ on/off (6.5V+ minimum)
- Run 1,2, or 3 pumps full time, with remaining pumps activated on demand (requires external switch, i.e. Hobbs, RPM, etc)
- 30 amp x 3 capacity, 99.3% efficient
- Replaceable internal fuses for each pump
- May also be used on other DC motors such as intercooler, water (check current requirements)
- NEW High Current APP® connectors pre-installed on main power/ground for maximum connection integrity and reliability
- Basic: comes with unassembled APP® connector for main power and ground
- Add Main Power and Ground Harness: 15′ 4 AWG power, 3′ 4 AWG ground assembled to APP® power connector with 100A inline fuse.
- Add Pump Pigtails: three pairs of interchangeable 7′ 12 AWG pump wires assembled to Delphi pump connectors and unassembled male Delphi connectors
- do not operate with over 16.5V supplied power
- for interior installation only
- run only one pump per output (three maximum)
There are no reviews yet.